|
GEAR
1.6.1
|
|
GEAR
1.6.1
|
  gear | Measurement Surface Class |
   BField | Global B field map |
| CalorimeterParameters | Proposal for an abstract interface that defines geometry properties of a typical sampling calorimeter as needed for reconstruction |
| FTDLayerLayout | Abstract description of layers in a FTD detector |
| FTDParameters | Geometry properties of a FTD detector needed for reconstruction code |
| Exception | Base exception class for GEAR - all other exceptions extend this |
| ParseException | ParseException used for parse errors, e.g |
| NotImplementedException | NotImplementedException used for features that are not implemented |
| UnknownParameterException | UnknownParameterException call Processor::end() |
| OutsideGeometryException | OutsideGeometryException used if user asks for info from geometry tree where no node is defined |
| SensorID | Helper struct for decoding a sensor ID |
| GEAR | Global constants used in GEAR |
| CGAGearDistanceProperties | CGA Implementation of the abstract interface that returns the (material) properties along a given distance between two points in in world coordinates |
| CGAGearPointProperties | CGA implementation of the abstract interface that returns the (material) properties of a given point in world coordinates |
| CGAGeometryInitializer | CGA Geometry Initializer class |
| GearDistanceProperties | Abstract interface for a class that returns the (material) properties along a given distance between two points in in world coordinates |
| CalorimeterParametersImpl | Implementation of |
| ConstantBField | Global B field map implementation with constant field |
| FixedDiskLayoutBase | Base class for circular PadRowLayout2D implementations |
| FixedPadAngleDiskLayout | Implementation of PadRowLayout2D for a disk with fixed angled keystone pads |
 FixedPadSizeDiskLayout | Implementation of PadRowLayout2D for a disk with fixed sized keystone pads |
  Row | Internal helper class for FixedPadSizeDiskLayout |
| vframe | Abstract description of layers in a FTD detector |
| FTDLayerLayoutImpl | |
| Layer | Helper class for layer properties |
| FTDParametersImpl | Geometry properties of a FTD detector needed for reconstruction code |
| GearMgrImpl | Manager class that returns the Gear classes for the relevant subdetectors |
| GearParametersImpl | Implementation of GearParameters - a set off parameters that can be used to describe the geometrical properties of a specific subdetector type for reconstruction |
| GlobalPadIndex | Global pad index implimentation |
| LayerLayoutImpl | Implementation of layered layout detector - typically a a sampling calorimeter |
| Layer | Helper class for layer properties |
| RectangularPadRowLayout | Implementation of PadRowLayout2D for a rectangular row based layout where all pads in a given row are equal and have rectangular shape |
| Row | Internal helper class for RectangularPadRowLayout |
| SimpleMaterialImpl | Implementation of gear::SimpleMaterial |
| SiPlanesLayerLayoutImpl | Abstract description of layers in pixel beam telescope |
| Layer | Helper class for layer properties |
| SensLayer | |
| SiPlanesParametersImpl | Abstract description of layers in pixel beam telescope with or without DUT |
| TPCModuleImpl | A wrapper Class for PadRowLayout2D, allowing which converts between local and global coordinate systems, and adds module appropriate functionality |
| TPCParametersImpl | A Container for TPCModules which describe the geometry properties of a given TPC |
| TrackerPlanesMaterialLayerImpl | Abstract description of layers in pixel beam telescope |
| TrackerPlanesSensitiveLayerImpl | |
| TrackerPlanesLayerImpl | |
| TrackerPlanesLayerLayoutImpl | Collection of layers = telescope description |
| TrackerPlanesParametersImpl | Abstract description of layers in pixel beam telescope |
| Vector3D | Simple three dimensional vector providing the components for cartesian, cylindrical and spherical coordinate systems - internal reperesentation is cartesian |
| Cartesian | |
| Cylindrical | |
| Spherical | |
| VectorND_T | Trivial N-dimensional vector |
| Vector2D_T | Specialization for 2D |
| Vector3D_T | Specialization for 3D |
| VersatileDiskRowLayout | Implementation of PadRowLayout2D for a wedge shaped module |
| Row | Internal helper class for VersatileDiskRowLayout, describing one row |
| ZPlanarLayerLayoutImpl | Abstract description of layers in a Vertex detector |
| Layer | Helper class for layer properties |
| ZPlanarParametersImpl | Geometry properties of a planar detector (parallel to z-axis) needed for reconstruction code |
| GearMaterialProperties | Abstract base class for implemenations of the GearPointPtoperties and GearDistanceProperties |
| GearMaterialPropertiesFactory | Factory singleton class - plugin libraries will have to implement a concrete factory and register it on loading |
| GearMgr | Abstract interface for a manager class that returns the Gear classes for the relevant subdetectors |
| GearParameters | Abstract interface for a set of parameters that can be used to describe the geometrical properties of a specific subdetector type for reconstruction |
| GearPointProperties | Abstract interface for a class that returns the (material) properties of a given point in in world coordinates |
| BoundaryRectangle | A class for boundaries of a rectangle |
| BoundaryTrapezoid | A class for boundaries of a trapzoid |
| CartesianCoordinateSystem | Cartesian coordinate system class |
| IBoundary | |
| ICoordinateSystem | An abstract base class for coordinate systems |
| MeasurementSurface | |
| MeasurementSurfaceStore | |
| MeasurementSurfaceStoreFiller | |
| MaterialMap | Material map using GearDistanceProperties |
| MaterialMapFactory | Factory to create material maps using GearDistanceProperties |
| TGeoGearDistanceProperties | TGeo Implementation of the abstract interface that returns the (material) properties along a given distance between two points in in world coordinates |
| TGeoGearPointProperties | TGeo implementation of the abstract interface that returns the (material) properties of a given point in world coordinates |
| TGeoGeometryInitializer | TGeo Geometry Initializer class |
| CalorimeterParametersXML | XML handler for CalorimeterParameters |
| ConstantBFieldXML | XML handler for ConstantBField |
| FixedPadAngleDiskLayoutXML | Abstract XML handler for FixedPadAngleDiskLayoutXML |
| FixedPadSizeDiskLayoutXML | Abstract XML handler for FixedPadSizeDiskLayoutXML |
| FTDParametersXML | XML handler for FTDParameters |
| GearParametersXML | XML handler for GearParameters |
| GearXML | Implementation of GEAR using XML |
| MergeXML | Class to merge two xml files |
| PadRowLayout2DXML | Abstract XML handler for PadRowLayout2DXML |
| RectangularPadRowLayoutXML | Abstract XML handler for RectangularPadRowLayoutXML |
| SimpleMaterialXML | XML handler for SimpleMaterial |
| SiPlanesParametersXML | XML handler for SiPlanesParameters |
| TiXmlCursor | |
| TiXmlBase | TiXmlBase is a base class for every class in TinyXml |
| StringToBuffer | |
| TiXmlNode | The parent class for everything in the Document Object Model |
| TiXmlAttribute | An attribute is a name-value pair |
| TiXmlAttributeSet | |
| TiXmlElement | The element is a container class |
| TiXmlComment | An XML comment |
| TiXmlText | XML text |
| TiXmlDeclaration | In correct XML the declaration is the first entry in the file |
| TiXmlUnknown | Any tag that tinyXml doesn't recognize is saved as an unknown |
| TiXmlDocument | Always the top level node |
| TiXmlHandle | A TiXmlHandle is a class that wraps a node pointer with null checks; this is an incredibly useful thing |
| TPCModuleXML | Abstract XML handler for TPCModuleXML |
| TPCParametersXML | Abstract XML handler for TPCParameters |
| TrackerPlanesParametersXML | XML handler for TrackerPlanesParameters |
| VersatileDiskRowLayoutXML | XML handler for VersatileDiskRowLayoutXML |
| XMLHandler | Interface for XML handlers of GEAR classes |
| XMLHandlerMgr | Manager for XML handlers of GEAR classes |
| ZPlanarParametersXML | XML handler for ZPlanarParameters |
| LayerLayout | Abstract description of a layered layout detector - typically a a sampling calorimeter |
| PadRowLayout2D | Abstract description of a planar subdetector with pads (cells) that are positioned in rows (circular or rectangular) |
| SimpleMaterial | Abstract interface for a simple material description tjhat hold s the following properties: A, Z, density, radiation length and interaction length |
| SiPlanesLayerLayout | Abstract description of layers in a pixel beam telescope |
| SiPlanesParameters | Geometry properties of a pixel beam telescope needed for reconstruction code |
| TPCModule | A wrapper Class for PadRowLayout2D which converts between the actual pad layouts local coodinate system and the TPCs global coordinate systems |
| NoZPositionException | An exception that is special for the TPCModule |
| TPCParameters | Proposal for an abstract interface that defines the geometry properties of a TPC like detector needed for reconstruction code |
| TrackerPlanesMaterialLayer | |
| TrackerPlanesSensitiveLayer | |
| TrackerPlanesLayer | |
| TrackerPlanesLayerLayout | |
| TrackerPlanesParameters | Geometry properties of a pixel beam telescope needed for reconstruction code |
| ZPlanarLayerLayout | Abstract description of layers in a Vertex detector |
| ZPlanarParameters | Geometry properties of a vertex detector needed for reconstruction code |
| TGeoMaterialProperties | Concrete implemetation for TGeo |
| TGeoMaterialPropertiesFactory | Implementation of Factory 'singleton' class |
| Tokenizer | Helper class for XMLParser |
| TiXmlParsingData |
1.8.6
