3 #define GEAR_GEARMGR_H 1 
    9 #include "gear/GearParameters.h" 
   18 class CalorimeterParameters;
 
   19 class GearDistanceProperties;
 
   20 class GearPointProperties;
 
   21 class TrackerPlanesParameters;
 
   22 class SiPlanesParameters;
 
   24 class ZPlanarParameters ;
 
   26 class SimpleMaterial ;
 
   27 class MeasurementSurfaceStore;
 
virtual void setDistanceProperties(GearDistanceProperties *distanceProperties)=0
Set the distance properties object. 
 
virtual void setEcalEndcapParameters(CalorimeterParameters *ecalEndcapParameters)=0
Set the EcalEndcapParameters. 
 
Geometry properties of a vertex detector needed for reconstruction code. 
 
virtual void setDetectorName(const std::string &name)=0
Set detector name. 
 
Abstract interface for a class that returns the (material) properties along a given distance between ...
 
virtual const TPCParameters & getTPCParameters() const =0
Get the TPCParameters. 
 
virtual const CalorimeterParameters & getHcalEndcapParameters() const =0
Get the Hcal endcap parameters. 
 
virtual void setBField(BField *bField)=0
Set the BField. 
 
virtual const FTDParameters & getFTDParameters() const =0
Get the FTD parameters. 
 
Proposal for an abstract interface that defines the geometry properties of a TPC like detector needed...
 
virtual const ZPlanarParameters & getVXDParameters() const =0
Get the VXD parameters. 
 
virtual void setTPCParameters(TPCParameters *tpcParameters)=0
Set the TPCParameters. 
 
virtual void setPointProperties(GearPointProperties *pointProperties)=0
Set the point properties object. 
 
Base exception class for GEAR - all other exceptions extend this. 
 
virtual const SiPlanesParameters & getSiPlanesParameters() const =0
Get the SiPlanes parameters. 
 
Abstract interface for a simple material description tjhat hold s the following properties: A...
 
virtual void setVXDParameters(ZPlanarParameters *vxdParameters)=0
Set the VXDParameters. 
 
virtual void setSETParameters(ZPlanarParameters *setParameters)=0
Set the SETParameters. 
 
virtual ~GearMgr()
Destructor. 
 
virtual const GearDistanceProperties & getDistanceProperties() const =0
Get the distance properties object. 
 
Proposal for an abstract interface that defines geometry properties of a typical sampling calorimeter...
 
virtual const CalorimeterParameters & getBeamCalParameters() const =0
Get the BeamCal parameters. 
 
virtual void setEcalPlugParameters(CalorimeterParameters *ecalPlugParameters)=0
Set the EcalPlugParameters. 
 
virtual const BField & getBField() const =0
Get the B field map. 
 
virtual void setHcalBarrelParameters(CalorimeterParameters *hcalBarrelParameters)=0
Set the HcalBarrelParameters. 
 
virtual const CalorimeterParameters & getYokeBarrelParameters() const =0
Get the Yoke barrel parameters. 
 
virtual void registerSimpleMaterial(const SimpleMaterial *material)=0
Register the SimpleMaterial with SimpleMaterial::getName() - throws Exception if a material of the gi...
 
virtual void setSiPlanesParameters(SiPlanesParameters *siplanesParameters)=0
Set the SiPlanesParameters. 
 
virtual void setYokeBarrelParameters(CalorimeterParameters *ecalBarrelParameters)=0
Set the YokeBarrelParameters. 
 
virtual const ZPlanarParameters & getSITParameters() const =0
Get the SIT parameters. 
 
virtual void setTrackerPlanesParameters(TrackerPlanesParameters *trackerplanesParameters)=0
Set the TrackerPlanesParameters. 
 
NotImplementedException used for features that are not implemented. 
 
Abstract interface for a set of parameters that can be used to describe the geometrical properties of...
 
virtual const GearParameters & getGearParameters(const std::string &key) const =0
Get named parameters for key. 
 
virtual const CalorimeterParameters & getLHcalParameters() const =0
Get the LHcal parameters. 
 
virtual void setGearParameters(const std::string &key, GearParameters *gearParameters)=0
Set named parameters for key. 
 
UnknownParameterException call Processor::end(). 
 
virtual void setBeamCalParameters(CalorimeterParameters *beamcalParameters)=0
Set the BeamCalParameters. 
 
virtual void setFTDParameters(FTDParameters *ftdParameters)=0
Set the FTDParameters. 
 
virtual const SimpleMaterial & getSimpleMaterial(const std::string name) const =0
Return the SimpleMaterial for the given name throws UnknownParameterException if no material is unkno...
 
virtual MeasurementSurfaceStore & getMeasurementSurfaceStore() const =0
Return the MeasurementSurfaceStore. 
 
virtual void setHcalEndcapParameters(CalorimeterParameters *hcalEndcapParameters)=0
Set the HcalEndcapParameters. 
 
virtual const TrackerPlanesParameters & getTrackerPlanesParameters() const =0
Get the TrackerPlanes parameters. 
 
virtual const std::vector< std::string > & getGearParameterKeys() const =0
Keys of all GearParameters. 
 
virtual const std::vector< std::string > & getMaterialNames() const =0
Names of registered materials. 
 
virtual void setSITParameters(ZPlanarParameters *sitParameters)=0
Set the SITParameters. 
 
virtual const std::string & getDetectorName() const =0
The unique detector name - typically the model name used in the simulation program. 
 
virtual const CalorimeterParameters & getEcalPlugParameters() const =0
Get the Ecal plug parameters. 
 
virtual void setHcalRingParameters(CalorimeterParameters *hcalRingParameters)=0
Set the HcalRingParameters. 
 
Geometry properties of a FTD detector needed for reconstruction code. 
 
virtual const CalorimeterParameters & getEcalBarrelParameters() const =0
Get the Ecal barrel parameters. 
 
virtual const CalorimeterParameters & getYokePlugParameters() const =0
Get the Yoke plug parameters. 
 
virtual const ZPlanarParameters & getSETParameters() const =0
Get the SET parameters. 
 
virtual void setLHcalParameters(CalorimeterParameters *lhcalParameters)=0
Set the LHcalParameters. 
 
virtual void setYokePlugParameters(CalorimeterParameters *ecalPlugParameters)=0
Set the YokePlugParameters. 
 
virtual const CalorimeterParameters & getLcalParameters() const =0
Get the Lcal parameters. 
 
virtual const CalorimeterParameters & getYokeEndcapParameters() const =0
Get the Yoke endcap parameters. 
 
virtual const CalorimeterParameters & getHcalRingParameters() const =0
Get the Hcal ring parameters. 
 
virtual void setYokeEndcapParameters(CalorimeterParameters *ecalEndcapParameters)=0
Set the YokeEndcapParameters. 
 
virtual const CalorimeterParameters & getHcalBarrelParameters() const =0
Get the Hcal barrel parameters. 
 
Abstract interface for a manager class that returns the Gear classes for the relevant subdetectors...
 
virtual const CalorimeterParameters & getEcalEndcapParameters() const =0
Get the Ecal endcap parameters. 
 
virtual void setEcalBarrelParameters(CalorimeterParameters *ecalBarrelParameters)=0
Set the EcalBarrelParameters. 
 
Geometry properties of a pixel beam telescope needed for reconstruction code. 
 
Geometry properties of a pixel beam telescope needed for reconstruction code. 
 
Abstract interface for a class that returns the (material) properties of a given point in in world co...
 
virtual void setLcalParameters(CalorimeterParameters *lcalParameters)=0
Set the LcalParameters. 
 
virtual const GearPointProperties & getPointProperties() const =0
Get the point properties object.