DDG4 setup ---------- Please note: examples, which are regularly checked and should work are -- CLICSidAClick.C -- CLIDSidXML.C -- CLICSidSimu.py Other AClick and python files are for temporary tests and are not supposed to work 'out of the box'. Starting Geant4 CLICSiD example as ROOT AClick ---------------------------------------------- - First adapt the initAClick script to fit your include/library pathes - load the script in root: .x initAClick.C - Then start the configuration in compiled mode in ROOT .L CLICSidAClick.C+ - See also instructions in CLICSidAClick.C Other AClick files are for temporary tests and are not supposed to work under all circumstances. Once you get the Geant4 interactive prompt, enter: /run/beamOn 1 1 = number of events to be simulated. Starting Geant4 CLICSiD example from XML ---------------------------------------- - First adapt the initAClick script to fit your include/library pathes - load the script in root: .x initAClick.C - Then start the configuration in compiled mode in ROOT .L CLICSidXML.C+ - See also instructions in CLICSidXML.C Once you get the Geant4 interactive prompt, enter: /run/beamOn 1 1 = number of events to be simulated. If you do not want to run from the ROOT prompt, you could also compile and link this script to a standalone main program. Starting Geant4 CLICSiD example from python -------------------------------------------- $> python /examples/DDG4/examples/CLICSidSimu.py Once you get the Geant4 interactive prompt, enter: /run/beamOn 1 1 = number of events to be simulated.